How Many Mats Do You Need for a Temporary Access Road? A Simple Way to Estimate

Access road mat count estimate header graphic with the Select Mat logo

To estimate the mats for a temporary access road, divide the road length by the mat dimension that runs along the road, multiply by the number of mats across the width, and add mats for turnarounds, laydown and staging areas. For example, 1,000 feet of road using 8′ x 14′ mats laid with the 8′ side along the road takes 125 mats for a single 14-foot lane, before turnarounds.

Step 1: Measure the access road length

Measure the full route in feet, from where equipment leaves firm ground to where it reaches the work area. Include any section where the ground is soft, wet or needs protecting, even if it looks short on the plan.

Step 2: Divide by the mat dimension along the road

Mats can be laid in different directions, so use the dimension that runs along the road, not the overall size. An 8′ x 14′ mat laid with its 8-foot side along the road covers 8 feet of road length and makes a lane 14 feet wide.

Common sizes from Select Mat’s line: composite mats are 8′ x 14′, laminated and CLT mats come in 8′ x 14′ and 8′ x 16′, and timber mats are 4′ x 16′ and 4′ x 18′.

Step 3: Multiply by the mats across the width

One 14-foot mat across gives a single lane. If you need two-way traffic or wider equipment, multiply by the number of mats across.

Step 4: Add turnarounds, laydown and staging

The road is rarely the whole job. Add mats for turnarounds, laydown areas, equipment staging and any crane or work pads at the end of the route.

A worked example

A 1,000-foot route, 8′ x 14′ mats laid with the 8-foot side along the road, one mat across:

  • 1,000 / 8 = 125 mats for the road
  • Add the turnarounds and staging areas from your site plan

To estimate trucking, Select Mat lists laminated 8′ x 14′ mats at 18 to 20 per truck, so 125 laminated mats would take about 7 truckloads. Other mat types load differently, so ask for the count on the mat you choose.

What changes the count?

  • Ground conditions: very soft or wet ground can call for a heavier mat or a double layer in the worst sections
  • Equipment: wider or heavier equipment can change the mat type and the width you need
  • Leapfrog staging: on long linear jobs, crews can move mats from behind your equipment to ahead of it, so you only cover the active work zone and need fewer mats on site

Get the count checked before you order

An estimate gets you in the right range. Send us your plans, location, equipment and timeline, and we will build the mat count into a detailed, line-item quote within 24 hours. Call 1-800-SELECT-MAT.

If the access road crosses wetlands or a waterway, check permit needs first. The U.S. Army Corps of Engineers Regulatory Program covers permits for work in those areas.

Frequently Asked Questions

How many mats per truckload?

It depends on the mat. Select Mat lists laminated mats at 18 to 20 per truck for 8′ x 14′ and 15 to 17 per truck for 8′ x 16′.

Can I use fewer mats on a long route?

Often, yes. With leapfrog staging, crews relay mats from behind your equipment to ahead of it so the same set keeps moving forward with the work.

Do you install the mats?

Full service, including installation and removal, is available on most projects regardless of size.

Related Resources

About the Author

Picture of Chris DiCicco

Chris DiCicco

Chris DiCicco, PMP, MBA, is CEO and Chairman of Select Mat, a full-service construction matting company serving the Gulf Coast and Southeast. He came to matting from a family plastics business and careers in chemicals, water treatment, pulp and paper, biotechnology and oil and gas, and he was recently granted a patent for a mat tracking device. As Principal Consultant at Terra Mater Group, he advises matting companies on operations, mat plans and technology, and he is an active member of the North American Matting Association (NAMA). Connect with Chris on LinkedIn.

More To Explore

Facebook
Twitter
LinkedIn
Email